The Steps Of Using Car Air Pump

Views: 0     Author: Site Editor     Publish Time: 2022-09-26      Origin: Site

The steps of using the car air pump:

1. Ensure the power of the air pump before use. If it is too large, you need to use a battery clip.

2. Then use a tire pressure monitor or the monitoring system that comes with the car to measure the tire pressure to see if it needs to be inflated or deflated.

3. At this time, the preparatory work has been completed, insert the air outlet of the air pump directly into the tire valve, and lock the lock of the air pump when the sound of the tire leaking is heard.

4. Finally, put the switch of the air pump in the "on" position to inflate, then if you need to deflate, just press the pressure relief button.

Then it should be noted that the operation can be stopped as long as the inflation/deflation reaches the specified value of the tire pressure, then its tire pressure value can be found in the car owner's manual, the inside of the fuel tank cap and the logo on the tire. Also, when using the air pump to inflate, if it has been used for more than 5 minutes, you need to stop it, let it dissipate heat, and avoid affecting its service life due to overheating of the air pump.